Random jumps

Wolfie

After an extended amount of testing with RandomJumps thingy, I found it to be working perfectly.

I took a peak on the source code, and it looks clean. Good work Adoxa.

OutCast

this may be standing very close to this “random jumps” thingy, so i’ll ask.
could you try making jumps from any point in space to a point in another system by player command?

this is a long-standing problem for some fl developers, you know :]
and i think there’s no need for something like fully finished plug-in, working prototype is quite enough.

Gisteron

some time ago on windows live (if i’m right) i saw a modified flhook that could do this. it was used at that time on the BSG-Galactica.com server. either it is deleted now or i’m mistaking with the place i saw the download at… maybe m0tah knows more.

J.R.

Sorry for my noobish question, but…
Do I have to delete the original "goto = " Entry of the objekt in the System INI-File to make RandomJumps work ?

Alex.

I have the file that I think Gisteron is referring to, I’ll go have a look for it soon.

cvekiboy

J.R. wrote:
Sorry for my noobish question, but…
Do I have to delete the original "goto = " Entry of the objekt in the System INI-File to make RandomJumps work ?

Yes you need! The first jump after server restart is always one that is written there. Without that I ended up in no-ending jump sequence.
After first, other jumps r read from second .ini file (still testing do they go rndm even me doubt adoxa can make mistakes).
[EDIT]

Yes you need!

Sorry 4 my mistake - I meant: Yes you need that line there!

adoxa

@OutCast: Console does it for single player.

@J.R.: No, you don’t. You do have to add them to the new file, though.

@sumanuti: I was testing with a single destination, thus overriding the original goto. Just tested again - redirect Li01_to_Li02 to Li03, Li03_to_Li01 to Li02. Start the server, New York to California takes me to Colorado. Restart the server, Colorado to New York takes me to California.

Wolfie

I also tested this with a jumphole that had no destination, it worked perfectly.

In other words you can create a jumphole and give it no goto entry in any .ini file, and make another jumphole go to it with randomjumps.ini without issues.

Also, what happened to my “No, you don’t” answer to J.R?

J.R.

adoxa wrote:

@J.R.: No, you don’t. You do have to add them to the new file, though.

Thanks for the reply adoxa.
Tested your great work and found it working very well… although I realise
that the first jump after server restart is always to its
original destination… maybe a random issue but a bit strange to me.
Anyways… I have to say a BIG THX to ADOXA. He is simply doing miracles !!!

cvekiboy

My case still acts like I posted before:

XX01.ini

[Object]
nickname = XX01_to_RNDM_hole
ids_name = 524826
pos = -12900, 0, 60900
rotate = 0, -45, 0
Archetype = jumphole_light
msg_id_prefix = gcs_refer_system_XX01
ids_info = 60212
jump_effect = jump_effect_hole
visit = 128
;goto = XX01, XX01_to_RNDM_hole, gate_tunnel_bretonia

RandomJumps.ini

[RandomJump]
object = XX01_to_RNDM_hole	; XX System Random Jumphole
goto = XX01, XX01_to_RNDM_hole	; XX System back
goto = Li02, Li02_to_Li01	; California
goto = Li03, Li03_to_Li01	; Colorado
goto = Li04, Li04_to_Li01	; Texas

In custom system Random JH that ends up where it says.
1. case: As shown last line in XX01.ini is commented and jumps stuck in sequence!
2. case: Un-commenting last line I got jump finished but as said in place where is written - than after it reads all from RandomJumps.ini where to finish it.

Also I found that client side don’t need special .ini so changing that is cool without notice.
Even like this - its amazing future that was planed long time before without sticking bunch of JHs in close spot.

adoxa

I see. My fault for not testing jump holes. New version available.

BTW, would you prefer RandomJumps.ini or multiple goto lines in the [Object] itself?

cursor

BTW, would you prefer RandomJumps.ini or multiple goto lines in the [Object] itself?

AWESOME work Adoxa ! Thx.

I would prefer a “RandomJumps.ini”, cause it´s NOT required client side and easier to handle the few Random Jumps within a ini, instead of several goto lines on a Object.

cheers
CURSOR

J.R.

Excelent work adoxa. Thank you very much. mate !!!
This will be a “new” feature in my Mod since i allready got so called “Instable Wormholes” in it.
Those used to have a different destination to “jump to” than the origin where you came from when you “arrive” there.
The new version of your DLL does perfectly what i was trying to “simulate” in the past. Many many THX !!!

Alex.

Gisteron: Can’t find the file on my hard drive, but searching ‘FTL Jump’ (I remember the file was called something like this) brings up an interesting result. Not quite sure what is in it as I don’t seem to have the right to access that forum. I believe it is related to a mobile spawning system.
http://the-starport.net/freelancer/forum/viewtopic.php?topic_id=889&forum=4&post_id=6683#forumpost6683

Gisteron

kos-acid coded it as i figured. dunno however, whether there is a contact from EOA or TLR to him. at least on bsg-galactica there is. maybe he would share this hook feature with us if we ask kindly.

Moonhead

Great feature!! Can’t wait to try it out (yet I must: sleep, work, family)

Alex.

Gisteron: This is kinda late, but I found what I was looking for and I think what you were looking for as well.

http://cid-1105a8f9b697e3cc.skydrive.live.com/self.aspx/FLHook/Kosacid/FLHookftlregen165.rar?wa=wsignin1.0&sa=987532708
Found it here: http://www.memes.no/88flak/forum/viewtopic.php?f=81&t=1280

Sorry about it being a bit off topic, but I’m not sure what’s wrong, I don’t appear to be able to go to Gisteron’s profile and PM him.

J.R.

did the download but cant manage to make it work…
copied the dll over an existing flhook.dll in my mod and added the
missing sections into the flhook.ini.
Maybe i don´t use it in the right way cos i don´t know exactly the parameters
of the /ftl or /sftl command in game.
Sometimes it says i have to use the command on a Jumphole/gate…
Could you please post examples for the usage of /sftl and /ftl ?

Thanks in advance…

Gisteron

to jump to neighbour system chose jumpgate/-hole and type/ftl <x-coordinate>, <y-coordinate>, <z-coordinate></z-coordinate></y-coordinate></x-coordinate>to jump to the center of an object within thy own system select it and type/jto jump to a destination within the own system type```
/sftl <x-coordinate>, <y-coordinate>, <z-coordinate></z-coordinate></y-coordinate></x-coordinate>

J.R.

Thank u.
Works fine exept the /j command…