Models giveaway
-
Currently I’m working on a new sleeper ship model but I’m having some setbacks, 3d max keeps crashing when i try the boolean command on this model and I haven’t figured out why yet.
Btw I couldn’t use your sleeper model cause it was too buggy m8 but maybe you’ll like mine, if i ever finish it
-
Not sure if it helps u a bit but there is not only a broken sleepership in FL.
There is also a sleepership in the manhatten cityskype, at last the fron and main body is there.
Take a look at it, there are some details u can not see on the hispania. -
Sleepership……
My opinion?
Who, me? Oh, thanks, StarTrader, thought nobody would ever ask!!
Hehheheheh…
Make a completely new sleeper ship, Sol :- slicker, more cool, more sleek, more bigger, more sleepership!
Design it with banks of cells for animal pairs to save and thousands of cells for “prime” human specimens in mind - you know, middle-men and middle-women:-
politicians,
insurance brokers,
bankers,
council workers,
managers…!!Make sure the lifeboats are enough for the crew and any kids.
And in the basement put lots of dungeons for murderers, poofs, paedophiles, transvestites, wife-beaters and other loonies next to the tigers and lions and sharks and crocodiles etc., so their meat is always fresh…!!! 8-)
And ensure the engines just about get it a couple of days into its voyage before they fizzle out…
<sighs>:)
Guess I’m in trouble now, huh? :roll:</sighs>
-
Hehe I’ll keep that in mind. On a side note, my sleeper model is way to buggy and it’s just impossible to continue with the modeling from this point on, as such I’m deleting the file and gonna start a new sleeper ship tomorrow, hopefully I’ll not make the same mistakes again … i still don’t know what those mistakes were but hey …
-
hopefully I’ll not make the same mistakes again … i still don’t know what those mistakes were but hey …
My gods man… you model like i code… pmsl 8-)
& sweet… been waiting on a “useable” sleepership for some time now… dam i can see me spending all Xmas & NY learning the “way of the texture” hehe… I can think of worse ways to spend the holiday…
-
Xmas is due to come in one month, my ship should hit the shelves tomorrow or such, untextured of course.
Meanwhile I finally figured out why the model had errors …. and as always -> human error … I hurried to make the sleeper ship and I didn’t noticed a couple of obvious hull surface mistakes which were done in the first stages of the modeling. By this time it would take me longer to remedy the situation than to model a new ship, as such, learning from those mistakes, the new ship is clean* and about 70% done. It ain’t detailed since I couldn’t see much from the Freelancer Intro … too blurry … damn video resolution, yet again, it isn’t supposed to be a true replica of the original.
Laterz -
The sleeper ship is an icon of Freelancer so I reckon my model has room for improvement …… as such, feel free to come with suggestions on things you’d like modified and I’ll look into it.
I named this ship “Oltenia” and I would appreciate it a lot if you’d keep the name at least somewhere in the ship’s infocard in the game … if you’ll use it of course .Well here it is:
**
**
Download model in 3DS format here:
http://www.2shared.com/file/9345448/9704bb42/Oltenia_sleeper_ship_by_SolCommand.html
or all models from here:
http://cid-5d0715049236d05b.skydrive.live.com/browse.aspx/.Publicor
http://digitalbrilliance.org/SC/
**
Next project … ?
-
SolCommand wrote:
Next project … ?
http://i27.photobucket.com/albums/c167/Dronetto/Galaxy-class_01.jpg
http://i27.photobucket.com/albums/c167/Dronetto/Galaxy-class_02.jpg
http://i27.photobucket.com/albums/c167/Dronetto/Galactic-class_descriptions.jpg
? please please please please please
-
Mirkha wrote:
http://i27.photobucket.com/albums/c167/Dronetto/Galaxy-class_01.jpg
http://i27.photobucket.com/albums/c167/Dronetto/Galaxy-class_02.jpg
http://i27.photobucket.com/albums/c167/Dronetto/Galactic-class_descriptions.jpg
? please please please please please
Is this a good time to tell u I hate star wars ?
Hehe
I’ll see if I find time for this one these days m8.Edit:
I edited a few things on my blog (still far from finished) and realized I should add a few links to direct ppl to some of the biggest mods out there. Any suggestions ? -
& you called me fast… bugger me she’s beautiful m8…
Next… hmm… how old ye Sol… do you remember the “original” V series… and those awesome transports they used?? we “need” a WORKING gunstar from last starfighter (the avalible one has major issues… belive me its been months and its still not converting properly)… anything from “Battle beyond the stars”… (awesome sci-fi film… i suggest anyone not seen… GO WATCH IT!!)
oh… hehe… and a LEXX… low poly of course… that’s the prob with the existing model it crashes in almost every modeler proggy as its just SO huge…
But V Transports… yeah… i dare say that will only take ye about a few hours at max… they pretty basic… just none exist… & I NEED EM… bahahahahah!!.. a V mothership would be cool too… for a base…
now if i could just get someone to make those uniforms for NPC’s… hmm… rabbits… tasy…
Erm… I could use a few new playtesters 8-) links on my sig m8
-
I’m 22 m8 and I’m sorry to say I haven’t seen that show u talking about. Post some pics of what you say you’d need and I’ll have a look, k ?
-
well… whilst searching for relevant pics… I managed to pick me up a 3ds of a smaller shuttle… nice… but for what i have planned in this area… just the begining…
Here are some pics i found around the net… some are kitbashes from fans… but i love the junkyard pic… I could go crazy in there…
& for fun… here’s “that” uniform… and what they “really” look like…
Still no “good” pics of a mothership… but it was basicly just a giant UFO… standard circle type. I will be spending Xmas -> NY watching it all again… as that’s when i get my box set from santa… lol
-
And some drawings that may be of use
http://www.kennethjohnson.us/files/V-Ship_Drawings_rotated.pdf -
SolCommand wrote:
The sleeper ship is an icon of Freelancer so I reckon my model has room for improvement …… as such, feel free to come with suggestions on things you’d like modified and I’ll look into it.
I named this ship “Oltenia” and I would appreciate it a lot if you’d keep the name at least somewhere in the ship’s infocard in the game … if you’ll use it of course .Well here it is:
**
**
Download model in 3DS format here:
http://www.2shared.com/file/9345448/9704bb42/Oltenia_sleeper_ship_by_SolCommand.html
or all models from here:
http://cid-5d0715049236d05b.skydrive.live.com/browse.aspx/.Public**
Next project … ?
*Jaw drops, then falls off chair onto the floor. . . . . *
Holy cow, There was no way i’d be able to get that amount of detail into this ship. Many many thnaks I will see how the others like it and let them know who made it , I can not wait to get this going. Much thanks Mate.
Passes a cold sixpack your way "here mate You deserive it "
-
@ Tunicle… there sweet m8… gonna have to hijack someones printer and print them out for my wall 8-)
Just played a bit with the shuttle… methinks i’ll try UV mapping this one… as it “has” to be 100% perfect… close just wont cut it… ( i textured it… but no… defiantly try UV mapping here…) when she’s done… I’ll hunt down its owner (there was no info…) & see about releasing it for all
@ Sol… I imported the sleeper into ms3d… and it went all funky… seems it lost some weld or verticie data along the way… bad triangles everywhere… any ideas on how i would fix that … I have Blender/XSI & Wings3d here… maybe in blender?.. oh and no 6 pack… here’s the darn brewery… hehe
-
Xarian_Prime wrote:
@ Sol… I imported the sleeper into ms3d… and it went all funky… seems it lost some weld or verticie data along the way… bad triangles everywhere… any ideas on how i would fix that … I have Blender/XSI & Wings3d here… maybe in blender?.. oh and no 6 pack… here’s the darn brewery… heheGot the same trouble, Used LithUnwrap opened it fine, resaved it as an OBJ file, Imported perfectly, but upon trying to texture it I was like WTF aye, I had no ideal what I needed to do to get it right.
-
I am sorry for the inconvenience guys. I gotta get some sleep now cause I’m going back to work in 5 hours but I did 2 test versions of the ship in .obj format. Indeed when I tried to save the original model in .obj format it gave an error, after a little bit of modifying the model I received no more errors when converting to obj. Test these version and let me know if they work. If not, I will look into it more when I get back from work ok ?
-
OMG and i mean OH !!! MY !!! GOOOOOOD!!!
Cool sleepership sol and a great addition to the FL stock. -
Thx Mindhunter, just doing what I can
…. so are those 2 models ok guys ? Any more errors ?
EDIT: I’ve been working for 4 hours trying to figure out what’s the deal with these errors, atm I’m in the final tests. Gonna post a new download link in a few minutes/hours.
-
After many hours of starring at vertices I think the sleeper ship is good to go. I don’t get any more errors when converting to .obj format. I also imported it into LithUnwrap and it looks pretty good but I have no idea how to work with that program, none at all, since I just installed it to test the model, so don’t take my word, test it yourself and see if it shows up well. I dunno how a model should look in lithunwrap so let me … us all, know if it’s ok, alright ?
If for some reason the model still shows problems … everyone feel free to track down the bug
I am also working on developing a cool uvw map for this ship but dunno if i’ll get it done … would be cool if i would/could but we’ll see.Download the new model, 3ds + obj format:
http://www.2shared.com/file/9386332/ea9a90f1/Oltenia_sleeper_ship_by_SolCommand.htmlor
