Dev's Limit Breaking 101 Techniques

cheeseontoast

i actually think thats an FX. im not sure id have to double check fox.

Nightstalker

Is there a different hex value for tractor beams then this?

1000000f in freelancer.exe, 0x1d848c = square of distance from loot that the “tractor all” button appears on HUD / can tractor in loot ~fox
0x1d848c = 1.1

I got the increased range but now the tractor beam is bigger than the ship

Tunicle

Hi, do you have the standard tractor effect or did you customise it or shrink your ships due to your system size?

Increasing the float value gives increased range with no increase on vanilla tractor beam size.

Nightstalker

It does it on all tractor beams. The only thing I’ve changed on the custom ones was the colors.

w0dk4

posted this back on the temp. TLR, might be useful to some:

Found the respawn time after any solar object will regain full health once destroyed:
0x85530 in server.dll (v1.1): 60.0 double float (= 60 seconds)

foxUnit01

Awesome. I’ll get it in the list. Thanks w0dk4.

JONG

Hi fox:

I was read your Information and make sure I’m not any mistake when I edit those files.

But I find the randommissions NPC attack player distance seem like can’t change, even I raise its value to 4500, they just stay there and don’t attack player until player go into 1800 distance.

How can I fix this ? thanks for your help.

FriendlyFire

Did you change all the related values?

maximum distance that NPCs will persist in MP

max range at which NPCs will engage enemies

Must be changed. Also, the job preferences have to be changed. Same for scanner ranges.

Otherwise, I wouldn’t know.

JONG

Thanks FriendlyFire !

That’s point:

The scanner ranges !

I forget to add the max scanner range for NPC use, now it work fine.

Thanks again for your help.

foxUnit01

Updated the list with new offsets. Of note is the proper indexing of Xerx’s OpenSP hacks so they may be easily added to any mod, and a proper indexing of the SP max persistance range for NPCs, so max ranges can now be properly increased for SP.

Also, I realize I’m really late in answering this, but there’s an offset - target bracket range I think - that also affects how wide the tractor beams are. That’s probably your issue, Nightstalker. I’ve also PM’d you this info incase you miss this post, since it’s a few months late.

Edit: Found it!
1.2f in freelancer.exe, 0x1c9800 = multiplier for width of tractor beams ~fox
0x1c9800 = 1.1

Vital

Any new findings about the patrols, fox?

Vital

FormationOp
200f, 0x6c00d –
500f, 0x6c017 –

Could you spot a bit more light on this, especially first values, cos this 200 value seems to be familiar, thats the quote from one of my posts:

If one ship of the formation has 0, 0, 0 position, it dosn’t matter how far the others, they dock well(firstone goes first, others follow). It works till approximately 0, 0, 220 position, after this they start docking manuver, and… fly away from the gates about 5-6k, turn around, start docking manuver and it all repeats, if the ships a more then 5-6 k from the centre of formation, they just start spining around with their docklights blinking.
It’s impossible to dock while they are trying.

Maybe that 200 value can help here.

foxUnit01

It’s possible, I haven’t really played around too extensively with those values yet, hence why they’re all still not properly indexed.

Cannon

Here’s the opensp patch for the 1.1 version of content.dll. This patch changes single player mode so that a new game “starts” in mission 13. This patch might already be available or documented somewhere else but I couldn’t find it so here it is:

Addr 0x4EE3A change 42 2A to A2 6A.

Nightstalker

here is what I got when I changed the values to 1000m and 2000m

200f, 0x6c00d –
500f, 0x6c017 –

The only use I have for this is the capital ship formations (Since some of my ships are 4 - 5 times bigger than vanilla ships). It works the way I want it to so far.

foxUnit01

So those are ranges that autopilot attempts to bring the ship closer to formation then? IE ranges cruise etc. are engaged at?

Also, I forgot to mention, but M0tah is responsible for finding all of those “experimental” offsets, so you can thank him for those.

? Offline

If i were to increase the scanner range, do i alter the view distance settings for the npc’s or is there a seperate setting for the scanner range? I noticed the one for solars but not sure if that’s the same thing

foxUnit01

Yeah, you would have to increase NPC spawning distances to have higher ranges - however Scanner ranges themselves are just defined by “range = (range)” under [Scanner] items. If you had a 5k spawn distance but a 3k scanner range, you would still only see NPCs 3k away.

lonestar

Ok I’ve reged, and now i have a question for a Missle that i wish to make.

I’ve been making missles for an A10 mod that I found, I’ve made the sidewinder missles, and Maverick missles. I wish to make a missle that can hit ships out at 100km Kinda like the tomahawk cruise missle, I want it to be used as a torpedo, and only for stations, mobile stations and capital ships.

Were do I go to hex edit the veiwing distance and what value do I change to make it so that I can veiw out to 100km. And once I get that ability, How do I go and add the same veiwing distance to radar. So that I can add a special radar for one certain ship that I’ll have to fire the Tomahawk missles.

Can someone help me to change the veiw from its normal to 100km so that i can experament with making this cruise missle.

Vital

Found few offsets, will post 1 for now, didn’t check the others the right way:
v1.1:
25000000f, Content.dll, 1195D4 - square of the distance from the end of the patrol path to the object over which patrol npcs won’t dock with it(so far tested only with jumpgates).
Rising this to very high value may prevent patrol crashes?