Shifting the HUD

w0dk4

Guys you need to look at the hudshift.ini!

adoxa

The supplied hudshift.ini needs to be edited before it has any effect (everything’s commented out), and placed in DATA\INTERFACE. If you’re using hudshifter.dll, you need to move it to DLLS\BIN, or use the full path in EXE\freelancer.ini. Similarly, hudshift.dll should be in EXE, or use the full path in EXE\dacom.ini.

StarTrader

w0dk4 wrote:
Guys you need to look at the hudshift.ini!

And you need to click the links in some posts.

See? Now you have 1920x1080…

Tomorrow you will have one of the two I mentioned above, which were derived entirely from my imagination (no disrespect to Sanyo or LG intended).

Let me know when (if) you get my drift (drift in this case means the unintentional wandering of the mind)…

viper

ok got it work now sorry im a noob

StarTrader

Don’t worry, this site is for all, ask any question and you will get an answer.

Don’t mind me too much, I’m a gwumpy wabbit from time to time.

My comments here were aimed at not following everyone’s wishes because it is never-ending and many are one-offs or will have a small following and are not worth the effort of people like adoxa - who should be working on our sur builder!

viper

Is their a way to put the chat also to the right position ?

cursor

Awesome work Adoxa

Works like a dream on my side, with your JFLP patch a perfect Widescreen support in Freelancer now.

Thx a lot m8

cheers
CURSOR

adoxa

Updated it, adding ChatBox (chat input window), ChatMsg (chat output window) and ChatMsgTrade (chat output window during trading). There’s also Horizontal and Vertical, changing everything at once.

Crazy

Nice work. Thanks

I just got an issue a few mins ago:
After switching back from desktop to freelancer my screen was bugged. Everything was moved a bit out of the window and I couldn’t see what I was typing in chat for example (as if the cameras.ini was miss configured).

I don’t know if it was related to HudShift.dll but it was the first time that it it happend since I’m using your widescreen patch.

viper

I just tried this:
; Swap the contact and weapon lists.
[HUDShift]
PlayerStatus = -0.7545, 0
TargetStatus = 0.7545, 0

But then Fl crash on login any ideas ?^^

warlordfmike

im not quite sure where to put the files. and what to do.

i can edit some files like this but these have got me lost.

i place Hudshift.dll in Exe. add the dll to Dacom.

place hudshift.ini in Interface.

but what of the other files on the folder. or do i move the whole folder to interface.

but than what do i do with hudshift.ini

faceplams. not a coder. can just edit sometimes.

adoxa

@Crazy: Sorry, can’t duplicate that (using 1280x800 and the 16:10 Horizontal shift).

@viper: Oops, my bad. The crash I mentioned in hudshift.ini was actually due to a wrong offset. Please download again (still calling it v1.00, though). You’ll also want to double up the difference (so using 16:9 you’ll want to use ±1.0945).

@warlordfmike: The dll and ini are all you need; the other files are the source, for the coders/curious. All you need in hudshift.ini is:

[HUDShift]
Horizontal = -0.033

```if using the 5:4 camera (the JFLP default, but a little cramped), or

[HUDShift]
Vertical = 0.026
GaugeBars = 0, 0

Crazy

@adoxa:
I can reproduce it now:

I’ve opened the NavMap (on a MP server), switched to desktop and then back.

I’m not sure if it is related to HudShift or to your widescreen patch in JFLP. I guess it will be caused by the latter but I will test it later.

Crazy

I can confirm it with just jflp.dll loaded.

Edit: I’ve tested the other windows too but alt-tabbing works fine while they are open.
Just the NavMap bugs it.

(Would be better placed in the JFLP thread but. yeah :D)

adoxa

It seemed the NavMap still wanted the 4:3 camera, so when it’s opened, I switch to that, restoring it when it closes. I guess alt-tabbing misses the close, so the 4:3 camera remains. Sorry, but that can wait till I get back to JFLP.

viper

Hi all I tested work now but one i gave it with an 1440x900 resolution get this result:
http://s10.directupload.net/file/d/2194/bjgxdrik_jpg.htm
Any ideas?
[Edit]
He opened and closed the hud one time then all looks fine, but after new login or F1 its bugged again until he open and closed the hud.
His System is Windows 7 64 Bit.

adoxa

I’ve uploaded version 2.00. It fixes viper’s problem and, for the dedicated, allows even more repositioning options - all the offsets are stored in the ini.

warlordfmike

right well im still stuck as to were i put the code. and such.

do i place the code you posted in cameras or do i place it in hudshift.ini & were do i place hudshift.ini

warlordfmike

warlordfmike wrote:
right well im still stuck as to were i put the code. and such.

do i place the code you posted in cameras or do i place it in hudshift.ini & were do i place hudshift.ini

im lost with this plug-in. i really dont get how to do it.

i have the files in the right place. but i dont know how to get the game to even run @ 1280x1024. and than i dont know if im to post anything in cameras.ini

also how do you remove the files. uninstall the plug-in. just delete. im wanting to start fresh.

warlordfmike

NVM i seem to have got it now. yea works like a champ. good work.

lol i just have to pick around when i cant seem to get something to work. im a coder in the making. just not learning anything of coding.

works great. looks & feels 1280x1024