Milkshape 3D 1.8.4 error report.
-
Yes of cors but It’s for cmp, sur and mat files exporting.
If you have other solutions please reply!!
-
You have done your model in Milkshape, and trying to export cmp, sur and mat, and Milkshape crashes - right?
1. Take Khed, import milkshape model into it and then save as new file with name anticrashmodel.ms3d
2. Take Milkshape, open anticrashmodel.ms3d and Try to export it again into cmp, sur and mat.
-
"Halloween sayd :
You have done your model in Milkshape, and trying to export cmp, sur and mat, and Milkshape crashes - right?
1. Take Khed, import milkshape model into it and then save as new file with name anticrashmodel.ms3d
2. Take Milkshape, open anticrashmodel.ms3d and Try to export it again into cmp, sur and mat."
Your not right, here is my real problem :
When I open MS3D it send me an error report, I can’t open MS3D and I think it’s microsoft’s updates but I’m not sure…
-
Please reply!!!
-
Well… just for some clarification…
I run 1.8.2, keep my PC fully upto date and am using Vista
no worries… and i dare say everyone else has fired up there own version on there PC after reading this.
Have you tried reinstalling it? & more so… WHATS THE ERROR… cant help if we dont know more sry… just telling us you get an error tells us nothing about your problem… & to be honest… you really should be asking Chumbalum soft what there product is doing as well.
-
I see lots of detours here…
I am using the latest version 1.8.5 beta with these plugins:-
SUR Importer v1,
SUR Exporter v1.1, (do NOT use v1.2 unless you know what happens),
adoxa’s CMP Importer 1.1.3,
CMP/3db Importer v1,
CMP Exporter v0.3,
3db Exporter v1.0.0.1
MAT Exporter v1.0and all are working. (Windows XP).
First - it may be a bad plugin.
Uninstall MilkShape, delete the folder that it was in.
Install MilkShape again and start MilkShape. If it is OK, the problem is in one of the plugins you were using.
Add them only one by one to find the bad one.
If MilkShape does NOT start OK before adding the plugins, then it is a Windows problem with your system or a problem with your install file.
Get 1.8.5 beta and try again.
-
It is not a plug in! I Go to test the 1.8.5
-
It’s not working!! What can I do??
Well… just for some clarification… I run 1.8.2, keep my PC fully upto date and am using Vista no worries… and i dare say everyone else has fired up there own version on there PC after reading this. Have you tried reinstalling it? & more so… WHATS THE ERROR… cant help if we dont know more sry… just telling us you get an error tells us nothing about your problem… & to be honest… you really should be asking Chumbalum soft what there product is doing as well.
In fact MS3D can’t open : I click on the shortcut and after it send me an error report, I don’t see MS3D’s window.
-
A trick i learnt modding stalker (and chasing specific module crashes)
Go into your control pannel (for your OS) goto Administrative Tools & open the Event Viewer. Do this just after Ms3d fails… and look for the most recent critical error… with some luck you’ll be presented with a readout of what just went wrong… and maybe what caused it.
for instance… at this moment in time… my WMA is crashing on exit (silly MS… grr) here’s what i get…
Faulting application wmplayer.exe, version 11.0.6002.18111, time stamp 0x4aa91411, faulting module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception code 0xc0000374, fault offset 0x000afaf8, process id 0x13cc, application start time 0x01cb28964b51ab40now i know i just installed MTX to try and play Mechwarrior4 Mercenarys (Failed by the way) and it played with my .net… obviously it screwed my ntdll.dll… and i now have a solution to my problem… reload my last current update for my .net framework.
That’s just an example… your problem could range from many things but you wont know untill you find out what (via the above instructions)
-
Event ID 1000
Application Failure ms3d.exe 1.8.5.0 in ms3d.exe 1.8.5.0 at off set 000e6ca7 ```An URL : [http://www.microsoft.com/technet/support/ee/SearchResults.aspx?Type=0&Message=1000](http://www.microsoft.com/technet/support/ee/SearchResults.aspx?Type=0&Message=1000) -
-
Error signal :
EventType : BEX P1 : ms3d.exe P2 : 1.8.5.0 P3 : 4a545810 P4 : ms3d.exe P5 : 1.8.5.0 P6 : 4a545810 P7 : 000e6ca7 P8 : c0000409 P9 : 00000000.Manifest.txt :
Server=watson.microsoft.com
UI LCID=1036
Flags=1672016
Brand=WINDOWS
TitleName=ms3d.exe
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=Si vous étiez en train de travailler, il se peut que certaines données soient perdues.
Stage1URL=
Stage1URL=/StageOne/Generic/BEX/ms3d_exe/1_8_5_0/4a545810/ms3d_exe/1_8_5_0/4a545810/000e6ca7/c0000409/00000000.htm
Stage2URL=
Stage2URL=/dw/GenericTwo.ASP?EventType=BEX&P1=ms3d.exe&P2=1.8.5.0&P3=4a545810&P4=ms3d.exe&P5=1.8.5.0&P6=4a545810&P7=000e6ca7&P8=c0000409&P9=00000000
DataFiles=D:\DOCUME~1\GUILLA~1.SN1\LOCALS~1\Temp\WERf1dd.dir00\ms3d.exe.mdmp|D:\DOCUME~1\GUILLA~1.SN1\LOCALS~1\Temp\WERf1dd.dir00\appcompat.txt
Heap=D:\DOCUME~1\GUILLA~1.SN1\LOCALS~1\Temp\WERf1dd.dir00\ms3d.exe.hdmp
ErrorSubPath=Generic\BEX\ms3d.exe\1.8.5.0\4a545810\ms3d.exe\1.8.5.0\4a545810\000e6ca7\c0000409\00000000
DirectoryDelete=D:\DOCUME~1\GUILLA~1.SN1\LOCALS~1\Temp\WERf1dd.dir00 -
Sorry, that doesn’t help. I’ve attached a screenshot. The top window is the intial crash; click “click here” and you get the middle window; click “click here” and you get the bottom window. In the bottom window, tell me what’s after Address:. If it’s 0x00000000004E78A7, then I did interpret it right, but I don’t see how it would crash there.
-
Ow men why french version and american of windows XP are not the same… it’s so strang… for that I do a screens. There is my only problem.
-
Hm, maybe you have to disable error reporting to get the display I see. That can be done by bring up System Properties (Win+Break), clicking Error Reporting and disabling it. As ST says, another approach is to move *.dll from the milkshape folder (it’ll tell you which ones it needs to actually start), so you can eliminate a plugin problem. I also installed MilkShape as standard, not trial, so there could be something with that, too.
-
OW boy!!! MS3D works on my mother’s user…. I CAN’T BELIEVE IT! !! Holy crape, it’s freaking idiot!
