EXPORT Q: Enter HERE PLzz

Sky-Blazer

SWEEEET SUCCESS

i created a cmp file and was able to import back into ms3d

with all intact. whooooohooooooo

Five Boulder’s just fell off my shoulder’s

Sky-Blazer

THANKS A MILLION
Now i gotta fly the little bugger

[RIP]Fusion

<insert dancing=“” smiley=“” here=“”>Glad to hear the good news Trader. Knowing this information will help you towards building successful .cmp models in the future.

Fus</insert>

Sky-Blazer

Well i was able to fly the staflier that i exported

and found out it Flys upside down quite gracefully

Guess i’ll have to fix that LOL but it did work.

[RIP]Fusion

Sky-Blazer wrote:
Well i was able to fly the staflier that i exported

and found out it Flys upside down quite gracefully

Guess i’ll have to fix that LOL but it did work.

Ya, that’s the other setting. As you discovered, you test ship flew upside down because you were using the other default setting, “Orientation = Flip Upside Down”. The Correct option for your Starflier test and any future test .cmp’s should be “Orientation = Back to Front”. In order to make sure that the cmp comes out right using this setting, first make sure that in the view screen of Front in Milkshape, you are seeing the rear of the ship(or whatever the object is). If you are not, you will need to select your model using either the Cntrl-A keyboard command or the Select button in the Model tab to select all faces, then use the Rotate command in the Model Tab to turn it around. I can’t remember which will be the correct axis, but if you use the wrong axis, don’t fret. Cntrl-Z will reverse the last function done, and you can try another. The nice thing is that you can try the three axis one at a time so you know which one you did right and which was wrong.

Edit: You will also need to make sure your ship or other object is right side up in the same screen, and if it isn’t, use the above steps to correct that.

Fus

Sky-Blazer

thank you for that info [RIP]Fusion

and all your help TRULY gratefull

cvekiboy

Using 0.2 exporter but HardCMP crashes while opening .cmp !
Even if I did selected separate groups and smoothed faces individually, or even with dif. export settings.
Tried one group, 10 groups (with 1 subgroup), scale to 1, back_to_front, …
Any idea?

[RIP]Fusion

sumanuti wrote:
Using 0.2 exporter but HardCMP crashes while opening .cmp !
Even if I did selected separate groups and smoothed faces individually, or even with dif. export settings.
Tried one group, 10 groups (with 1 subgroup), scale to 1, back_to_front, …
Any idea?

Strange. I always export as one group, and 99.9% of the time I don’t have a crash of Hard cmp. My first question would be how many polys does your model have? HardCMP may be having an issue rendering it cuz of poly count. To find that information out in Milkshape 3d, go Tools/Show Model Statistics.

Fus

cvekiboy

Yea, default Eagle works good in import/export.
Here is my stats

Possible that mass # of tris/verts cousing this error?

[RIP]Fusion

sumanuti wrote:
Yea, default Eagle works good in import/export.
Here is my stats

34K! Holy cow! is that the model you mentioned in the post previous to mine? If you have the program and Milkshape extra file, get LithUnwrap and use its’ optimization command to try and reduce the poly/vert count of the ms3d file. If you don’t have the program and/or the ms3d addon file, zip up your ms3d file here and I will see if I can do the poly reduction.

Fus

cvekiboy

http://www.fileswap.com/dl/DdymscWl0N/3MAJ-VHF.rar.html

Its already been lowered - damn!

MUCHOS Kudos!

[RIP]Fusion

I did not extract your textures from the mat file, but even at reduction to 28k, I am still unable to get the model to load into HardCMP. My HardCMP doesn’t crash, but all I see is white. I have no wireframe, no black background, nothing. I can’t even open the mat file.
My suggestion is to use the Direct X Poly reducer found in the Tools menu for limiting the poly count. If you can get it somewhere near the 10k mark successfully, it might co-op for you.

Fus

cvekiboy

Upon testings 20K is max limit that in HardCMP shows properly.
Lowered values to 19K and model still looks good (even better!).
Will models work properly in game even it is beyond that limit?
And will the poly count in any way affect game-play in performance fields?

[RIP]Fusion

sumanuti wrote:
Upon testings 20K is max limit that in HardCMP shows properly.
Lowered values to 19K and model still looks good (even better!).
Will models work properly in game even it is beyond that limit?
And will the poly count in any way affect game-play in performance fields?

That is an interesting question. First off, grats for knocking the polys to 19K! That’s nearly a 50% reduction! (17K would be 50%)

Freelancer is an old game. The best response I can offer based on my work on The Underverse is this rule of thumb: Fewer polys = better gameplay. That’s both from the perspective of the game engine rendering the model and the players being able to fly it. There was a person here in this forum who was able to bypass the 20K limit by breaking his model into 2 seperate cmp files, and then combineing the two into one cmp. I was never able to successfully able to duplicate this, so I can’t help you with that. Hope that answers your questions.

Fus

Sky-Blazer

1: Not Completely Sure on EXPORT GROUPS Using CMPVo.2

Below i tried to be as precise as possible in hopes that my mistake stands out

My understanding is as below example for Anubis

a:To my understanding this is what it’s asking for “number of groups”

As Number of Groups:–—*0a
Or_elite as 1 of 9
Or_star_wing 2 of 9
Or_port_wing 3 of 9
Or_Engine01 4 of 9
Or_Engine02 5 of 9
Or_Engine03 6 of 9
baydoor01 7 of 9
baydoor01 8 of 9
Or_glass 9 of 9

b:To my understanding this is what it’s asking as “group Quantities”

As group Quantities-----*0b

Or_elite <mat.: elite_2560r=“”>--------- as 1 of 5-----*1
Or_elite <mat.: engine_grill01=“”>------ as 2 of 5
Or_elite <mat.: lib_weap10r=“”>--------- as 3 of 5
Or_elite <mat.: metal030r=“”>----------- as 4 of 5
Or_elite <mat.: weaponsplate2=“”>------ as 5 of 5-----*1

Or_star_wingmat.:elite_2560r----- as 1 of 3-----*2
Or_star_wingmat.:lib_weap10r----- as 2 of 3
Or_star_wingmat.:weaponplate2---- as 3 of 3-----*2

Or_port_wingmat.:elite_2560r------- as 1 of 3-----*3
Or_port_wingmat.:lib_weap10r------- as 2 of 3
Or_port_wingmat.:weaponplate2------ as 3 of 3-----*3

Or_Engine01mat.:elite_2560r-------- as 1 of 2
Or_Engine01mat.:engine_2560r------ as 1 of 2

Or_Engine02mat.:elite_2560r-------- as 1 of 3-----*4
Or_Engine02mat.:engine_grill01----- as 2 of 3
Or_Engine02mat.:weaponplate2----- as 3 of 3-----*4

Or_Engine03mat.:elite_2560r-------- as 1 of 4
Or_Engine03mat.:engine_grill01----- as 2 of 4
Or_Engine03mat.:metal030r---------- as 3 of 4
Or_Engine03mat.:weaponplate2------- as 4 of 4

baydoor01<mat.: elite_2562sideor=“”>---- as 1 of 1

baydoor02<mat.: elite_2562sideor=“”>---- as 1 of 1

Or_glassmat.:o_glass--------------------- as 1 of 1

2: Originally Plates Or_star_wing ,Or_port_wing ,Or_elite ,where grouped with there selected spots

What I Did:

5 Renamed hard points at my choice of positions to suit my need

I Grouped New Plates with Older Existing Plates in there respective NAME GROUPS
I Tried ungrouping them Also

1: PROBLEM-The ship shows as missing,deformed,some weapons visable,Mat-planes that extend the far reaches of the solar system
2: PROBLEM-Weapons don’t go to the proper spot
3: PROBLEM-One items Shows as 2 in mount window,more mount windows than are HP

Again using CMPVo.2

for level of detail i left at “default 0”

for orientation i set to “Back To Front” Prior to opening exporter i set my object (Anubis) so that i was looking at the back of it

for setting i did save a ces file but dont know if its neccessary

for scale down i set to 1 using the slider

for number of Groups i put as believed according to -----*0a

for group quantities i put as believed according to -----*0b

WHEN I TRIED THE UNGROUPED WAY I ADDED each new plate as another GROUP QUANTITIES

1: Do HardPoint’s need to be grouped?

2: Do Hardpoint’s need to be grouped with there respective Mount Plates?

Thanks in advance Sky-Blazer.</mat.:o_glass></mat.:></mat.:></mat.:weaponplate2></mat.:metal030r></mat.:engine_grill01></mat.:elite_2560r></mat.:weaponplate2></mat.:engine_grill01></mat.:elite_2560r></mat.:engine_2560r></mat.:elite_2560r></mat.:weaponplate2></mat.:lib_weap10r></mat.:elite_2560r></mat.:weaponplate2></mat.:lib_weap10r></mat.:elite_2560r></mat.:></mat.:></mat.:></mat.:></mat.:>

cvekiboy

Use Piper’s CMP Exporter.
No need to define groups and no group limits!
Just place Hp’s below group parts where they need to belong (be part of).

Sky-Blazer

The piper exporter is not gonna work it is not in my export list

i need to get V2 working i am missing a piece of the puzzle and i verry much need it .

i have tried every combanation i could think to try and i’m getting nothing

i even tried using one texture for the whole bloody thing

I Keep getting a message Mesh or mesh count don’t add up.

Or somthing like that.

cvekiboy

Sky-Blazer wrote:
The piper exporter is not gonna work it is not in my export list

i need to get V2 working i am missing a piece of the puzzle and i verry much need it .

Spend time to make it work and u have no any troubles.
Find other versions of Milk Shape where it will show in the list.
My 1.8.4 finds it! With 1.8.0 had no luck.