Anyone else still need a SUR generator?
-
Quarks -
I am sad (but also glad) to say that…
Sadly both surs fail within 3 to 10 minutes in the same way mine do!
I tried them one at a time, and ran the test 3 times for each sur. Same system, same encounter, just changed difficulty to select the right ship and sur.
Very many thanks for making them.
Hopefully Sushi can also confirm that mine fail on his machine, and I’ll see what I can do to take it on from there.
Many thanks in advance guys.
-
Started the NPC test now. It’s just an empty system, with one base, and those two models and surs continuously blowing each other up.
edit: 1hr30min in : no crashes
-
Since I have this problem, too…I just jeplaced the li_fighter’s model with Startrader’s ship and edited the loadouts, then edited the manhattan pop zone, nothing else. So usually there should not be any problem.
-
It certainly is weird, every single ship in my mod (there are no vanilla ships) use surs made with the sur tool, and I’ve not experienced any crashes of any kind at any time. Doesn’t mean it can’t happen, just fortunately hasn’t yet.
Does this happen with every sur you make ST or is it isolated to a few particular ships?
Going back to what was mentioned earlier about crashes potentially happening because the hull sur was poking through the shield bubble and getting hit first, wonder if you have checked whether this might be the case in this instance, probably have because your meticulous, but I thought I’d mention it anyway.
-
Forsaken wrote:
ST, no offense to your abilities or anything… but are you absolutely sure it isn’t just a SUR issue?No offence taken at all, I need all the help I can get to find the cause of this problem. If it’s a method problem then I need to find it.
I’ve been struggling with surs for a long time, and many work right away when I use the Sur Splicer method. Others crash right away on launch and are easy to remake. That can be strange, as remaking the same sur from the same parts often works!
I don’t have the problem others have with some parts of a sur not registering hits, this I think is naming problems that I solve by careful naming during the process.
Other methods and also some of my efforts with Sur Splicer run for a while but just refuse to run clean for a long period no matter how many times I optimise the ship groups and remake them.
By optimise I mean I remove thin bits and booms from ships to ensure only the big chunky sections remain for sur building.
So I have been doubting myself, and this is why I have asked others to test the same surs, and Quarks made a new set for me which also failed in the same way mine did - so either we both have bad environments or there is a problem with sur generation.
I have used two PCs for sur building and testing, one is my laptop and the other is a desktop. Same results, a good sur is good on both and a bad one is bad on both.
This particular problem is odd because it takes a long time for a sur to fail, the FLServer.exe crashes. I test them one at a time, there are only these test ships used by NPCs (DevilRay and Manta) and a base ship that kills them. I have some other Nephilim ships that I have made surs for (Moray, Lamprey, TripleSkate) and those fail in the same way, so I am just using these two for testing now.
When I put vanilla surs on the test ships too then the game runs for 12 hours plus with no crashes.
If we can isolate the cause of the problem between us then I’m hoping LS might melt a little and fix it for us, or another expert might generate a new tool or exporter.
But without isolating the precise cause of the problems, if it was me I would not be interested either.
LS hinted at internal lines in the sur, and Bejaymac many years ago fiound the same problem when using the exporter v1.1 (and v1.2 was worse). This is connections between lower-order vertices, which causes the sur shape to be concave and not convex throughout as it should be.
So - if a couple of others would please test the same two surs that I attached and confirm they are clean or crash, and perhaps if you would also test the new surs that Quarks made for me, we can take it from there.
I have used the manual method with Sur Splicer with the best success, other methods are faulty including Sur Builder, which is so close that it is a sad thing.
What is my ultimate goal? A guaranteed method or utility that everyone can use to make good surs quickly without the sweat and tears that I have to go through each time.
All testing and confirmation of good/bad is very welcome, fixing these difficulties will benefit all modders.
Sushi’s 1.5 hours looks promising that the surs are in fact good and it might be my PCs and Quarks’ PC setups.
-
Tested for 5 hrs, no crashing. I had to stop because I wanted to use my computer for other things. Not sure what’s up, but the surs are fine with my setup. To review how I tested this:
Empty system. Nothing in it except ambient light.
One base to undock from
Just the ships in questions attacking each other for 5 hrs. I was flying one of them as well.That’s it. 5hrs, no crashing, no errors.
-
Sushi, many thanks.
There is another angle I am trying to isolate if you have the time please:-
My crashes happen by a single NPC faction attacking the base ship, and adoxa has narrowed the crash to a possible munition collision.
This doesn’t sound completely convincing to me.
My theory is hull to hull collision, maybe when an NPC with the sur crashes into the base ship hull. It does not crash when I use the same base ship and use any vanilla sur for the NPC faction with the same DevilRay or Manta ship.
Could you please use one faction with the DevilRay or Manta, one at a time, and make them hostile to your base, let them attack it and be killed by the base please?
I really would appreciate you testing this method, it is such an intermittent problem - if it fails for you in this way then we can be almost certain it is a ship to ship collision problem that happens so rarely.
By the way - I am assuming you are not using any error-preventer hack?
Thank you.
-
-
Thanks adoxa, will do asap.
-
adoxa wrote:
StarTrader, log the packets and find out exactly which type of collision it is (or mail me the hopefully highly compressed *.bin and *-bad.txt files). Sushi, I hope you’re testing with MP (I expect you are), since SP doesn’t have this problem.Ya, always test in MP.
@ST: I’ll retry when I get a chance.
-
Sushi - I ran it your way last night, I set the test-sur NPCs wth the DevilRay to neutral to the base so it would not attack them, and had my Lib Navy (vanilla ships and surs) attacking them.
Guess what - it ran clean for 2 hours! I didn’t have time to test longer, but normally it will fail within 10-20 minutes every time when they are attacking the base ship.
So I think to be conclusive I would like to see what happens on your machine when you set them up (one faction only) to attack the base ship/station so it kills them.
A base ship with a custom sur would be more accurate, as that is what I’m using, but mine is huge - 1800 metres long, so if it is a hull collision it may still not happen on yours if your base ship is small.
I will set up adoxa’s traps to see what collisions we catch in any case.
Thanks again.
-
If you are interested, this is the mod I was using, Junkers and Hogosha using the bad ships and fighting in front of Manhattan.
-
Quarks wrote:
Since I have this problem, too…I just jeplaced the li_fighter’s model with Startrader’s ship and edited the loadouts, then edited the manhattan pop zone, nothing else. So usually there should not be any problem.Thanks Quarks.
So you get the same problem just by having the two factions kill each other?
Not by attacking a base, right?
So my hull to hull collision theory is wrong, I will do more extended combat testing too.
Many thanks guys, it will be great to identify the cause of yet another rare crash problem.
-
Well, it might have happened because one of them flew against a tradelane ring…
-
A question regarding this SUR Generator:
It seems to create a SUR per mesh group, which is nice, however… I tested it with one CMP which was a bunch of convex chapes I made using “Convex Tool” in MilkShape, and the SURs that this Generator created was a bunch of thin triangles. Really weird.
I’m really not quite sure how to use this app and can’t seem to find a proper tutorial on it.
-
Tried Quarks mod. Crashed reasonably quickly (the last packet sent was FLPACKET_SERVER_DAMAGEOBJECT, with different parameters to all other such packets). Applied my two plugins, which caught two more (another damage object; the other one’s time didn’t correspond exactly, but FLPACKET_SERVER_DESTROYOBJECT was likely), but none after another hour. Restarted, but still none after more than an hour. Restarted, and still none after almost an hour. So StarTrader, don’t bother running Packets; GetCollisions probably isn’t worth it, either; GetRoot will prevent the crash, though. Once I finish off tweaks to Console, I’ll get to work on the MilkShape sur exporter.
-
BlueSpawn wrote:
A question regarding this SUR Generator:It seems to create a SUR per mesh group, which is nice, however… I tested it with one CMP which was a bunch of convex chapes I made using “Convex Tool” in MilkShape, and the SURs that this Generator created was a bunch of thin triangles. Really weird.
I’m really not quite sure how to use this app and can’t seem to find a proper tutorial on it.
Increase the duplicate radius setting until it stops. Small ships can mostly get away with a radius of 0.1 (more refined sur) whilst big ships/objects may need a very high radius to to prevent those duplicates being generated. I’ve had to go as high as 50 with some large objects.
-
adoxa wrote:
Tried Quarks mod. Crashed reasonably quickly (the last packet sent was FLPACKET_SERVER_DAMAGEOBJECT, with different parameters to all other such packets). Applied my two plugins, which caught two more (another damage object; the other one’s time didn’t correspond exactly, but FLPACKET_SERVER_DESTROYOBJECT was likely), but none after another hour. Restarted, but still none after more than an hour. Restarted, and still none after almost an hour. So StarTrader, don’t bother running Packets; GetCollisions probably isn’t worth it, either; GetRoot will prevent the crash, though. Once I finish off tweaks to Console, I’ll get to work on the MilkShape sur exporter.adoxa - Well I got 3 crash logs, the common factor is use object 50 to the DevilRay, which is where the NPC’s Countermeasure Dropper is mounted - indicating a missile is onto him.
I am wondering that the NPC is hit by the missile and then that hit collision calc is going wrong? I attach the 3 crash logs below anyway, hope it will give you something to get us on the track.
I shortened the GetCollision-bad-2.txt in the middle to fit it into the 1MB limit but all of the other files are complete. Thanks adoxa
Sushi - if your test ships are not being chased by missiles this might also explain why your tests aren’t failing.