.obj -> .sur converter

This is what we called the “Shrink wrap” - Sur explorter does this, and it is present in the vanilla surs for warships. Only fighters have the shield bubble.

When we export the sur parts to use with sur splicer, there is no “shrink wrap” around the ship at all.

I don’t know if this “no shrink wrap” is needed for anything? Bases or scenery for example?

StarTrader wrote:
This is what we called the “Shrink wrap” - Sur explorter does this, and it is present in the vanilla surs for warships. Only fighters have the shield bubble.

When we export the sur parts to use with sur splicer, there is no “shrink wrap” around the ship at all.

I don’t know if this “no shrink wrap” is needed for anything? Bases or scenery for example?

Apparently it’s quite important in first level collision detection, from what w0dk4 was telling me.

Anywho, this program is incredible

The surs we have been making until now are only faulty because they have had no hpids. Otherwise they work well without the shrink-wrap.

This is one “why?” that I have not yet understood.

When we use Sur Splicer to make surs, there is no shield bubble and no shrink wrap either, yet those surs work well for collisions and hits too.

So - should we always have a shrink wrap on large models, or are there vanilla models of anything (bases, scenery, other?) that must be made with no shrink wrap?

Furthermore, what’s the point of the shield bubble? Shield hit detection relies on another SUR, doesn’t it? So then why do fighters have them at all?

Also, does/will the converter do shield bubbles?

One thing to note, and something that bothers me; when loading a SUR made by the converter into HardCMP editor, the editor crashes. That’s kinda annoying, and the editor doesn’t crash when loading SURs made from MilkShape’s SUR Exporter.

Too bad we dont have the source for HardCMP, but thank god the new UTF editor will soon replace it.

I also wonder about the shield bubbles though.

Regarding shrink-wraps, I think every vanilla ship is shrink-wrapped even if it has a shield bubble.

mknote wrote:
Furthermore, what’s the point of the shield bubble? Shield hit detection relies on another SUR, doesn’t it? So then why do fighters have them at all?

Also, does/will the converter do shield bubbles?

Shield bubbles are just for your eye, details. If your shield is online the hit detection will use this shield bubble. No hit will reach your ship, it will hit the bubble far around the ship.
But you don’t realy need this, like I sad: just a detail.

The sur converter won’t create shield bubbles. And one point for you: shield bubbles are using extra surfiles (they are defined in select_equip). These bubbles are represented by a 3db file without visible geometrie and just a HpConnect Point.

It would be logical for the shrinkwrap to be used as a “second-level collision hitbox”. That is to say, the game would check for hit detection in three increasingly costly steps:

1. Bounding boxes/spheres; very quick and efficient.
2. Shrinkwrap, simplified and convex polygonal model.
3. Full SUR, concave and complex.

It’d only reach (3) if both (1) and (2) register a hit. Without a shrinkwrap, it has to go straight from (1) to (3), which can be costly if the SUR has lots of small bumps and details or openings. I’m guessing it might even use different algorithms (read: faster for the former) for shrinkwrap and full SUR, since the former can be assumed to be convex.

Thus, shrinkwrap is not essential, but helps with performance. I think Sushi’s current tests have been conclusive on that matter.

Skotty. wrote:
The sur converter won’t create shield bubbles. And one point for you: shield bubbles are using extra surfiles (they are defined in select_equip). These bubbles are represented by a 3db file without visible geometrie and just a HpConnect Point.

if you delete this file, freelancer takes the cmp’s hitbox to “replace” the shield’s hitbox

The .3db shield model has a sur, this is the shield bubble visual collision/hit box, and it can be resized. I’ve done that to make a very large dreadnought shield. But as there is no shield bubble around my large ships, collision detection is not triggered until the munition hits the ship, so hits only appear at the hull surface.

HardCMP does not crash for me, I am using v1.8 (v1.23 does not work with my graphics card). My surs open fine including the large Avioki.

The reason for bounding boxes is to avoid the game engine having to continually check for hits. It only needs to check for hits when any bounding box has been penetrated by another object, so it conserves processing power until it is needed.

The shield bubble actually uses the shield shape defined in the shield_link = line in shiparch.ini to show the visual hit.

There is no overall shrink-wrap (bounding box) around the ship if the ship has a shield bubble, because the shield bubble has a bounding box. When there is no shield bubble, each group has a convex sur shape as normal, and there is a bounding box (shrink wrap) around each group too. These are the “type 5” parts in the vanilla sur files. Open one in MilkShape with the Sur Importer and take a look by peeling off the layers and then you can see clearly the additional bounding boxes. These are the ones we could not reproduce.

If you remember (and as you can see when you import a sur) there are two identical shapes in the sur for the shield bubble - one is bound to HpMount (0xF00FB9DE) and the other is an identical “bounding box” which surrounds it, and has a 3 or 4-digit hex number (an offset, but from what I don’t know) as its id.

I understand that the collision engine checks for penetration of the bounding box to start checking for hits, and as the shield bubble (HpMount) is identical in shape and size, it registers a collision or hit immediately.

So if we want to see the visual shield around the ship being hit, we need to have the shield bubble, or else the visual hit will be close to the ship surface.

This is fine.

For the shrink-wrap around an entire ship, this is the bounding box, and checking for hits begins when another object penetrates this bounding box. The engine checks for a collision between whatever object has penetrated this bounding box and any collision boxes inside this bounding box. The collision boxes are the sur shapes around our ship parts or object parts. If there is no collision with any collision box then the penetrating object is allowed to continue on its path.

So if there is a hit then it appears close to the ship’s surface, where the collision box surface is found.

This is also fine.

So overall and for compatibility with vanilla FL surs, I think we do need a shield bubble option for small ships.

Now how about when there is no bounding box at all, only sur shapes, as we have when we generate a sur with Sur Splicer?

Is this last version used in vanilla FL, or is it only a fluke that we made with Sur Splicer accidentally, and it just happens to work as long as we can put in the hpids?

Since the shrink-wrap is only visible in HardCMP and when we import a sur into MilkShape, and does not cause collisions, but only triggers collision detection, do we need to remove it at all?

Lastly - the bounding boxes (type 5) that are in all vanilla surs around the model groups - what exactly are they there to do, since collision detection is already triggered by the shrink wrap or HpMount bounding box around the entire ship?

Yes there’s been a flurry of posts, I’ll read them and check and fix my posts.

Schmackbolzen wrote:
@FF: Also don’t forget the bsp tree, which usually does a major speedup in collision detection. None of the custom generated .sur files had one so far…

Huh, I’d missed that. Guess it further explains the incredible performance boost we’re getting with those new SURs then.

Mad props to you, Schmack

ok i done some tests tonight
i don’t know if it can be usefull for you but …

test on the a9, multipart cmp —> it works like a charm

test on the colony3station (who is pretty big and complex … colony3 station) –-> no way, with several cmp, no differences, no hit registred and no hull detection

test on the avatar station, it seems to work
i noticed one strange thing, maybe it can be important for you to know

at avatar1.jpg, i can pass through
then at avatar2.jpg, i shoot on the base
and at avatar3.jpg, i can’t pass anymore
it’s the same place, exactly
i don’t know what the laser has done but can he “activate” the detection ?

http://img593.imageshack.us/g/avatar3y.jpg/

Nice tool Schmack, the recent updates make it work like a charm. still crashing on higher poly objects but that does not bother me at all considering sur meshes should not be 9K in poly count.

Nice thing is now that i can use lightwave to create the models, hardpoints, and sur mesh. only using Milkshape to convert the mesh to cmp.

next thing to have would be a tool to convert obj files to cmp, with a scaling factor. now that would be totally juicy to match this tool.

Cheers Mate, two thumbs up.

Schmackbolzen wrote:
@FF: Thanks ^^

@Mirkha: Don’t forget that it is attached to root only. I would say that’s why it did not work at all.

Concerning the flying through: I would have to test it myself with the model to be able to draw any conclusions.

Just so you know, Schmack, I redid all of FW:ToW surs using your converter, all 124 ships work flawlessly. Not only that, we saw some significant performance improvements

The only thing the exporter doesn’t do are the multiple component .surs but that’s such a small issue.

I’ll do the stations next and tell you how it goes.

Schmackbolzen wrote:
@Mirkha: Don’t forget that it is attached to root only. I would say that’s why it did not work at all.

Concerning the flying through: I would have to test it myself with the model to be able to draw any conclusions.

here the models if you want to test
http://svn.freeworlds.fr/FWMod/avatar.rar
and http://svn.freeworlds.fr/FWMod/colony3.rar

I have made a station sur with your soft, and i encounter CDT when trying to fly through, collision are OK but few second after some collision, CDT, don’t know if its the sur or the CMP of my station, will make another test without the sur and if CTD again, then the sur is GOOD and my cmp is crapy lol^^

ANyway, it’s a good job, and you soft let me make good surs for some ships which have previously bad surs

Thanks for your soft

Well i’ve tried this and managed to create a sur that fails every time on every model i’ve tried so far. Clearly i’m doing something wrong.

Process of what i’m doing is as follows,

1. Import model into MS as a cmp. ( Do i need to import the hardpoints as well?)
2. Export model as OBJ file (end up with an OBJ file and a MTL file)
3. Open new converter, import newly made OBJ file
4. Left the number as 5 (no real idea what it does anyway)
5. I tick the second box (because it seems to make sense)
6. Hardpoint section left blank (prob the cause of my errors tbh)
7. Can someone show exactly what needs to go in this section please. All very well saying stick the hardpoints in but how? What’s the format for inclusion? Is it,

addon = ge_kf_engine_01, internal, 1
equip = ge_kf_engine_01, internal, 1
ge_kf_engine_01, internal, 1

You see my point here? With no documentation how are those who didn’t go to sur school expected to work this out?

Any help appreciated

PS. No complicated replies please, pretend i don’t know anything about surs or this utilty