.obj -> .sur converter

ok another test

• import cmp in milkshape
• export as an obj
• convert this obj in sur
• it works great

it takes me 1 minute … so if you want a “bubble” hitbox it’s just perfect
if not, as me ^^, you have to do by hand

i don’t have yet tested with a multipart ship but it’s on the way so i came back ^^

When unthinking people unjustly accuse me of being nasty and unkind, my fur lies flat on my back, my ears fold back, and my claws suddenly extend…

Why do those of you assume my comments were to Schmackbolzen and not to my pal Gisteron, who took it as it was meant?

Schmackbolzen, you are doing good work, and I very much appreciate the difficulty of this task and the effort you are putting in. I have said this already several times - it seems some here cannot read.

And I understand the reasons for your decisions, and the reason for choosing .obj format. Yes I know it makes the tool independent and it can be used for many modelling programs, and this is a good thing.

I have set out the guidelines and specifications that would make the tool complete, and yes, I will be disappointed if this tool falls short of making an identical vanilla sur, with the options that we need.

Why? Because the other tools all do that already, and we can fix those by adding the hpids to any surs generated with Sur Splicer or Sur Builder, or by working within Sur Exporter v1.1’s limit of 18 sur parts as it already adds hpids and complete with the correct sur shapes for each one too.

Finally it is up to you if you wish to follow them or do it differently, you are the proggie and you are not bound to me in any way. But remember the majority of people here have no clue about what is in a .sur file. The fact that they might be happy is NOT a good measure. They can’t be bothered to go through the pain of extended testing that I have done, in trying to understand why those attempts all failed eventually.

FF: Yes FF it IS a pain to have an extra step when I (or you in some future life) make surs for 50-60 models. It’s not a case of one extra step/click, so stop being a dumb arse. Count the steps and clicks, and repeat 50 times and let’s see if you think the same after even 20 exports. It already takes a lot of extra time to make the convex hull shapes and check them and remodel and do it again. So belt up and go make some more nice lighting and weapon hit effects, leave the surs to those who know the difference.

Until now we lacked the understanding and we still currently lack the tools. We finally proved that the surs are missing important parts, and now we know what those parts are. I also proved that sur parts with gaps between them also work, and this is invaluable to those who want to design bases with remote “island” modules. This tool will hoefully be able to make good surs for those too.

The rest of you seem to be happy with your incomplete surs, and when you have random crashes you are happy with just restarting FL Server. So - be happy.

I am not, I want my (and your) surs to be as problem-free as possible. It seems that some of you think I am alone in wanting the options of shield bubble (for fighters), no shield bubbles but shrink-wrap (weapons, single sur part exports, bases, and large ships for FL compatibility), and close-fitting surs with no shrink-wrap at all (large ships with gaps, bases and large dockable ships). Fine. Then you will never need them, right?

Go think.

Anyway this is my final input, I won’t be dragged into another fracas, and I don’t take kindly to being scoffed at when I am doing things for the common good and benefit to all.

Schmackbolzen, again my thanks and well done for taking this on, it is a difficult thing to achieve. I would be very happy if you choose to follow the specs, it is to help you to make a complete tool, for every modeller who uses it in future,and many are only now getting interested in making mods and new ship models.

One more advice please if you will - please teach a native English speaker what you mean and what your tool does, and let them write the documentation, there are a lot of misunderstandings so far in your description, and it is not your fault but you don’t have complete knowledge of the language, it is not an easy thing to achieve. Thanks again.

It seems that some of you think I am alone in wanting the options of shield bubble (for fighters), no shield bubbles but shrink-wrap (weapons, single sur part exports, bases, and large ships for FL compatibility), and close-fitting surs with no shrink-wrap at all (large ships with gaps, bases and large dockable ships). Fine. Then you will never need them, right?

well, you’re not alone but, personnaly, i don’t have an ounce of competence in this area
so my dream is to take a cmp –-> with a tool make a sur directly from the cmp and of course have all covered like weapons …ect …

but but but i no longer believe in Santa Claus
and i imagine a good tool requires time
on my mind it’s a first version, let’s see what it becomes

i doubt the people from microsoft or digital anvil ever had a cmp to sur generator. they rather did model all of their 50-60 surs manually and exported them with a converter. ofc not with a version similar to what schmackbolzen uploaded into this topic. maybe one of their first converters was like that and maybe one of the ones schmack will release in recent future is just what they had in the end. we can be happy that there are programmers doing progress with this format. the perfect tool is coming soon.

i prefer the input of hardpoint names on creation of sur file. that way you just have to re-export if you rehardpoint an object, you don’t need to remodel the hardpoints on the sur mesh.

@ST: Pardon me? I’ve already done enough grunt work to know how it is. I don’t need no lessons from you, as much as I respect you as a modder. Feel free to defend your point, but personal attacks are unnecessary.

Now. Reading your post, it would appear everybody’s fine with broken tools and halfway done SURs. I re-read the entire topic and I cannot surmise what made you say that. Throughout, people are congratulating Schmack on making the tool and that’s about it really.

And here’s the party crasher: it’s almost certain all the vanilla SURs were built by hand. If you’re looking for a tool that’ll reproduce them perfectly, tough luck. Computers have a hard time doing models and I don’t expect they’d have any easier time making SURs for those models. If you want an automated solution, LS’s tool is as good as it gets. If you want truly optimized SURs, then you’ll need to do them by hand, just like how the devs did.

Schmack’s tool is fantastic in that as long as your geometry works, you’re guaranteed to have a working SUR. No fiddling with fucking MS3D trying to understand why it unwelded 34212 vertices and messed up your import. Just export to OBJ from your favorite graphics program and bingo!

Furthermore, it wouldn’t be a stretch to imagine a simple change to support drag and drop. Schmack, I think it’d be nice if you could add support for a configuration file that stores all the options the GUI offers and thus allows people to just drag and drop the OBJ file onto your EXE to produce a SUR file. The process is equivalent to using a command-line tool and typing the name of the OBJ file as the first argument, so it’s simple and it’d streamline the process even further. It then becomes a matter of export, drag, done.

Finally, ST, you set the guidelines and specifications, right? I don’t recall them being approved and you hiring Schmack or any such thing. You told what you wished to see, nothing more. You’re free to be a sad panda if you so desire, but don’t come in like that and say it doesn’t meet the “guidelines”.

this is turning out to be a really good tool.

i tested this out on two models. the first one was a normal poly model (1200 verts, about 2300 poly’s) sur file was generated and turned out rather good looking too.

the second model was higher poly model, about 11,000 verts, and about 9000 poly’s. it took a while but it did generate it. i had to redo it because i forgot to remove the hp poly’s. so i removed them and attempted to redo the sur generation, however this is where problems started. from this point forward the application throws a out of memory error 9 out of 10 times while the other 1 out of ten times it simple hangs on the generating tree … method. and it now does not matter the poly or vertex count, it just simply stopped working.

also you may want to consider multi threading the application. specially the routines that are the heart of the app.

cheers though mate, good job so far.

I’d argue that you shouldn’t be using a 10k+ polygon model for a SUR file. It should be like a fifth to a tenth of whatever normal model you’re using. At that point, multithreading would have little use because the generation would already be fast enough whatever the case.

I’d much rather see bugs fixed and features implemented

At 13000+ poly it gives a memory leak waning and freezes .
Yes it makes very nice surs, i tested with a solar with 6k poly with holes and worked very good.

anyone tested how it behaves with baydoors of dockables?

Downloaded the sur converter, opened MS3D, imported a ship cmp, exported as .OBJ. Was kinda confused when I fired up the converter but common sense always prevails. Left the 1st block at 5. Checked the 2nd and 3rd. Typed in the HP’s for the ship, hit go.

The sur it spit out looked beautiful, but kinda large, about 140KB….

So I fired up the dev server, launched FL, undocked. To my delight, no crash!! No server errors, no spew errors. Fired up 2nd pc and began shooting the hell out of it. Registers gun hits, missles and torps, flawlessly. Unmounted my shield and bumped it about 100 times, still going. I have seen the same behavior with single group surs I made using sur builder. They worked great just shooting at them, but under stress test about 18 out of 20 I made using it crashed between 10 mins to an hour.

I shut down the server, set zone to spawn 30 npcs and let it run. 2 factions both flying the same ship with the new sur, and a base shooting at them both. 2 hours now, no crash.

All I can say is EXCELLENT WORK!!!

The only problem I saw was the memory leak. Oh and since my girl has been out of town all week, she will want to kill you when she gets home today as its now 6:30am and I been up all night playing with sur files…

schmackbolzen, can you extend your sur program with the option to make sur for 3db-s also (the 3db sur dont have root group , its replaced with 00000000 instead of 2D8F6812).
It could be a box checked for example .
Those types of sur are used in all space scenery objects (asteroids) and it`s annoying to replace every time with the hex editor.

Schmackbolzen:

Very good results so far. Here’s my Avioki capital ship in space dock, with a new sur I can fly through all the gaps including the rear boom “nugget”, and collide with all body parts as it should. I was unable to fly through any body surface.

Good work, thanks.

Looking forward to the next step.